I saw this little jetboat on Aliexpress and wondered what it might take to get it properly running. After seeing some breakdown videos on jetboats and modifying my Proboat PBR, I decided to give it a try. It's a decent 1s powered brushless jetboat but it lacks a decent control system and reverse. I gutted the control system and added a small 1s brushless esc/receiver unit for a micro plane. The reverse is controlled by a 9g servo, and the bucket is scaled down from a file meant for the Proboat PBR. It's run off a logical switch within Edgetx. When reverse throttle is applied the motor runs forward and the bucket drops automatically. I might change it to a 2s system and it still needs detailing and lights. I'm thinking about repainting it in Canadian Coast Guard markings