Police (Scotland) 1.12 scale. made from a Semi-Kit by Models by Design, built 2014.
This is modelled from the interceptor42 range by Safehaven Marine. This is my first full build of a model, having only done restorations previously.
Model length is some 42 inch, beam of 12 inch. (106cm x 31cm)
Power is by twin E-Max BL2826 Brushless motors and 1, 80amp speed controller running on 2 NiMH 7.2 volts.
Fitted with Action electronics Police siren, and with detailed rotating blue lights and searchlights.
I sail this at Cold Knap Lake Barry Vale of Glamorgan, and I am the Founding member of the Vale Of Glamorgan Model Boat Club.
Also included is my Portland Pilot interceptor 42 which was the original prototype from Models by Design which I purchased and added lighting etc, this runs on Brushless motor running on 12Volt lead acid.
Visit our website at http://vgmbc.org/

Eezebilt 50plus series (see http://eezebilt.tk/PTBoat.html for free plans )

20" long - designed to be built in a bedroom.

Cheap (£6 raw materials) starter boat for introducing youngsters to modelling...

Following burning out the motor by fouling the prop on a polythene bread wrapper I fitted a new 160 amp speed controller and got a bargain motor from Giant Shark. it is an Emax GT4020 which cost about £14. I realised what a bargain it was and went back only to find Giant Shark have ceased trading. The video shows the boat running on a 4 cell Lipo, it goes a bit quicker on a 5 cell that I have. I am really sold on Lipo power as Dave said I would be. I have just ordered a 3 cell Lipo for my crash tender

Pictures Atlas Crane made plastic & wood
from some plans

Ayton Cross Tug by Jose Miguel, Madrid
Two engines
Lenght 120 cmts

37" tug, near completion, Futaba radio, single screw, fire monitor, bilge pump, deisel sound, for nephew.

This 1/12 scale model is based on the Aerokits Solent Class lifeboat. Over the past 5 months it has been under going a major refit. I originally built the boat about 35 years ago and got the "bug" again last September. I've done the best I can to make a silk purse out of a sows ear.

Its powered by two MFA Torpedo 800 electric motors. power comes from two lead acid batteries, each rated at 12v 7Ah. Control is provided by two Mtroniks Tio ESC. The twin spade rudders are linked to one servo. Each ESC has its own receiver. I found that one receiver, using a Y lead, could not continuesly keep the two ESC supplied with a signal and they kept going into Failsafe mode alternately. I got round it by binding two receivers to the one transmitter. Within the engine compartment is an automatic bilge pump. Two probes detect if/when the water level rises to a certain amount in the bilge and activates the pump.

The model has working radar scanner , navigation lights, search light and blue flashing light.

If you want to see the boat in action please go to my You Tube page at https://www.youtube.com/user/coljacktonvale

Lorraine B with all the finishing touches @ QE2 park Ashington Northumberland

Lorraine B @ QE2 Park Ashington

Molly at normal speed in focus sharper but shaky

here are some photos of finished project on the water at pickie pool bangor she is powered by 540 motor and 60mm prop winch radar lights al in working order she tows the net well stacks of power
this boat is scratch built inc winch rgds Robert waterson angus

Molly Northumbrian Coble at QE2 Park Ashington