Annuaire du port
Springer #4 USACOE Stoplog
Caractéristiques
- Longueur du bateau
- 14" (35.56 cm)
- Type de moteur
- Brushed
- Type d’entraînement
- Direct
- Hélices
- Single
- Type de batterie
- LiIon
- mAh de la batterie
- 286 mAh
- Type d’hélice
- 3 Blade
- Taille de l’hélice
- 40mm
- Durée d’exploitation
- 358 min
- Vitesse du modèle
- 363 km/h (225.6mph)
Photos
À propos de ce bateau
This is my fourth Springer tug. It was built to resemble the U.S. Army's Corps of Engineers stoplog tug located at Little Goose Dam in Washington State. The scale is about 1/17. The model had to be modified slightly because the length to beam ratio between the real tug and a Springer are slightly different. This keeps the model within the Springer class rules.
Aimé par
Chargement…
Commentaires
Se connecter pour commenter.
I built four Zippkits Springers and did the same hull finish for each. Sanded, coated with spar varnish (brushed on) filled voids with Testors model filler (JB Weld, or others should work), sanded, filled, varnished again until finish was acceptable. Sprayed on paint, usually Rustoleum (sometimes Walmart brand). For hulls and decks I go with the standard hardware store spray paints, no need to go expensive. Protects the hull just fine!
Hope this helps.
Lew 😮