This was a Touchwood static kit that my boy brought back from Coniston, it said it could be converted to Rc and had some sketchy drawings that were not very good. I decided to go brushless with it and lipo battery, was not an easy job as had to go it alone to find out C/G and drive set up. The kit was very poor with a twisted hull and resin parts that were far too heavy, I made some aluminium planing wedges and various other parts to save weight. This project took the best part of 5 years to complete as it would go back on the shelf as I got stumped for ideas then back off again as I found a bit more inspiration, overal it came out well and runs on rails with. Good turn of speed as you can see in the vid I posted. (Motor: 2881kv) (ESC: ETTI) (10/10)