StanC
Basic
Quartier-maître 1re classe · 213 pts
Pensacola, Florida, United States
Membre depuis Nov 2022
Dernière connexion il y a 3 ans
Âge 54
À propos
Hobbyist by nature. Love building scale models
Signature
Stan C
StanC’s port
1 bateauStanC’s journaux de construction
1 blogTéléversements récents
Dernière activité
Dernière publication il y a 4 ans
RestartingWell I am almost done sorting and putting things away. Getting close to having my shop set up the way I want it so it shouldn't be much longer before I restart the work on and finish the Tow Boat up. In the ph…
♥ 3 likes727 viewsSet Back!So while moving to my new house I place my tow boat up on a shelf. So when I left and shut the door I heard something crash to the floor! I open the door and found my tow boat in the floor with substantial dam…♥ 3 likes931 viewsMotor Boating around the pond!So my nephew, who has been helping me some, was anxious to see it go around the pond. So after tinkering with the rudders and tying both motors to the one good speed control, we added the 12v battery and one b…
+2♥ 3 likes1,199 viewsRudder controlswell I managed to get the rudders hooked up and working. Ended up with a bad speed control which almost burnt the boat up. Never fails, it seems one step forward and one step backwards.
♥ 3 likes1,313 viewsRe: Float testingYes sir the nephew wanted to see it float so we added a few rocks while at the pond no leaks found at this point so moving forward1,403 viewsFloat testingWell I've managed to finish the majority of the glass work still more sanding and preping for paint on the hull. I decided.to see where it was as far as the draft. Initially sitting it in the water it was floa…
♥ 3 likes1,446 viewsRuddersWell I've managed to get some rudders made. I've got both steering rudders and 2 of the 4 flanking rudders made. Tomorrow I hope to finish the other 2 flanking rudders. I just used some brass tubing and a flat…
+2♥ 3 likes1,507 viewsRe: Tow Boat Kort nozzlesUnfortunately my 3d printer is packed away. I am also still learning to use it. I haven't really designed anything other than simple shapes but have bought a few and downloaded a few free designs. I actually b…♥ 1 like1,532 viewsTow Boat Kort nozzlesWell I've made it back ashore and made a little progress on the tow boat. I started by adjusting my shafts in the boat and once I was satisfied with the alignment I reaffixed them permanently. Then it was onto…
+5♥ 3 likes1,552 viewsRe: Samuel B RichmondSo I have made it home boy was I way off on my guessing. It actually is 1/48 scale 36 1/4 inches in length.692 views
♥ 3 likes727 viewsSet Back!So while moving to my new house I place my tow boat up on a shelf. So when I left and shut the door I heard something crash to the floor! I open the door and found my tow boat in the floor with substantial dam…♥ 3 likes931 viewsMotor Boating around the pond!So my nephew, who has been helping me some, was anxious to see it go around the pond. So after tinkering with the rudders and tying both motors to the one good speed control, we added the 12v battery and one b…+2♥ 3 likes1,199 viewsRudder controlswell I managed to get the rudders hooked up and working. Ended up with a bad speed control which almost burnt the boat up. Never fails, it seems one step forward and one step backwards.♥ 3 likes1,313 viewsRe: Float testingYes sir the nephew wanted to see it float so we added a few rocks while at the pond no leaks found at this point so moving forward1,403 viewsFloat testingWell I've managed to finish the majority of the glass work still more sanding and preping for paint on the hull. I decided.to see where it was as far as the draft. Initially sitting it in the water it was floa…♥ 3 likes1,446 viewsRuddersWell I've managed to get some rudders made. I've got both steering rudders and 2 of the 4 flanking rudders made. Tomorrow I hope to finish the other 2 flanking rudders. I just used some brass tubing and a flat…+2♥ 3 likes1,507 viewsRe: Tow Boat Kort nozzlesUnfortunately my 3d printer is packed away. I am also still learning to use it. I haven't really designed anything other than simple shapes but have bought a few and downloaded a few free designs. I actually b…♥ 1 like1,532 viewsTow Boat Kort nozzlesWell I've made it back ashore and made a little progress on the tow boat. I started by adjusting my shafts in the boat and once I was satisfied with the alignment I reaffixed them permanently. Then it was onto…+5♥ 3 likes1,552 viewsRe: Samuel B RichmondSo I have made it home boy was I way off on my guessing. It actually is 1/48 scale 36 1/4 inches in length.692 views